News/Blog

ALLIAN Tractor Maintenance Precautions

Allianactor

ALLIAN Tractor Maintenance Precautions

  1. Rust Prevention Measures
    Park the tractor in a garage as much as possible to protect it from wind, sunlight, rain, and snow erosion.
  2. Oil & Filter Cleaning and Replacement
    Timely clean and replace engine oil & filter, gearbox gear oil, lifter hydraulic oil & filter. Do not mix oils of different grades.
  3. Belt and Paint Maintenance
    Loosen the engine fan belt, and remove it if necessary. Wrap and store the belt separately, then spray anti-rust agent into the pulley grooves. Repaint any parts of the ALLIAN tractor with chipped paint.
  4. Pipe Sealing
    Seal unclosed engine pipes (such as intake and exhaust ports) with protective materials (canvas, tarpaulin, or oilpaper) to prevent foreign objects, dust, and moisture from entering.
  5. Control Handle Positioning
    Place all control handles in the neutral position (including electrical system switches and parking brakes). Align the front wheels and lower the suspension rods to the lowest position.
  6. Cooling System Care
    For users with radiator water tanks, drain the cooling water immediately after use to avoid engine block cracking due to freezing.
  7. Fuel Tank Cleaning
    Regularly clean the fuel tank: park the tractor on a level ground, turn off the engine, remove the drain plug under the fuel tank, and drain the sediments at the bottom.
  8. Battery Maintenance
    Check the battery capacity regularly. Inspect the battery voltage monthly—charge it promptly if the voltage is below 12.5V to prevent difficult charging and reduced lifespan after long-term storage. Use the battery's indicator eye to check charging status and quality: green indicates 合格 (qualified, sufficient power), black means discharged, and white indicates battery damage. Remove the battery for storage in a ventilated, dry, and fire-free place if unused for a long time; turn off the main power switch for short-term storage.
  9. Lubrication Grease Replacement
    According to the user manual, remove old lubrication grease from lubrication points and replace it with new grease.